Sintex & Plastic Tank Cleaning in Faridabad

Sintex & plastic tanks in Faridabad

Sintex and other plastic loft tanks are everywhere in Faridabad — on builder floors in Ajronda, DDA-style flats in the NIT sectors and rented portions across Dabua and Amar Nagar. Being translucent and sun-warmed, they are perfect breeding grounds for algae, so the water picks up a faint green tinge and a slimy film forms on the inside walls. Underneath, the hard borewell water still drops its usual gritty sediment on the floor of the tank.

Plastic tanks need a gentler touch than concrete or masonry ones. We jet-wash at a pressure that lifts the film without cracking or scoring the plastic, and scrub with soft pads instead of wire brushes so the walls stay smooth. A rough, gouged surface only helps algae grip harder next time. Sintex cleaning sits alongside the overhead, sump and society work in our full water tank cleaning in Faridabad, and you can see the whole range at water tank cleaning in Faridabad; here we are dealing specifically with your Sintex or plastic tank.

Why Faridabad Sintex tanks turn green

Light is the trigger. A Sintex tank on a Faridabad rooftop takes direct sun for hours, and where sunlight reaches the water inside, algae takes hold and spreads into that familiar green film. A gap in the lid or a broken overflow only makes it worse by letting in more light and airborne spores. Once the film is established, plain draining and refilling does nothing — the algae is anchored to the wall and has to be scrubbed and disinfected off.

The hard water adds a second problem on top of the algae. Faridabad’s mineral-heavy borewell supply leaves a fine gritty sediment and a dull scale even inside plastic tanks, and the two layers together give the water a stale taste and cloudy look. We clear both — sediment vacuumed from the floor, algae scrubbed from the walls, then a food-grade disinfectant wash — and reseat the lid so light and dust cannot restart the cycle straight away.

How we do it — our 8-step process

• 1. Inspect & drain We check the tank and lid, then drain it down, saving what clean water we can.
• 2. Sediment removal Settled grit and the slimy layer at the bottom are scooped and wet-vacuumed out.
• 3. Soft jet wash Walls, floor and ceiling are jet-washed at a pressure safe for plastic — no gouging or cracking.
• 4. Manual scrub The algae film and inlet/outlet mouths are hand-scrubbed with soft pads, not wire brushes.
• 5. Anti-bacterial treatment A food-grade disinfectant wash kills remaining bacteria and algae spores.
• 6. Vacuum & rinse Loosened dirt is vacuumed out and the tank rinsed clean and ready to refill.
• 7. Lid & overflow check We reseat the lid and check the overflow so light and dust can’t feed new algae.
• 8. Photos & certificate Before/after photos and a dated service record sent to you on WhatsApp.

Sintex & Plastic Tank Cleaning prices in Faridabad

• Up to 500 litres (Sintex loft tank) — ₹699
• 501–1,000 litres (standard 1000L Sintex) — ₹899
• 1,001–2,000 litres — ₹1,299–1,499
• Multiple plastic tanks / society — bulk discount on 4+ tanks

No travel charge across Faridabad. The final price is confirmed on the call — it depends only on tank size and access.

Areas we cover in Faridabad

We reach every part of Faridabad. A few of the areas we serve — tap yours:

Common questions from Faridabad customers

“Which areas of Faridabad do you clean Sintex tanks in?” We cover the whole city — NIT sectors, Ajronda, Amar Nagar, Dabua Colony, Green Field Colony, Ashoka Enclave, Charmwood Village and the Greater Faridabad and Ballabgarh societies. Sintex loft tanks on builder floors and rented portions are our most common job, so give us your address and tank size and we will slot you in.

“How much does Sintex tank cleaning cost in Faridabad?” By size, same as any plastic tank. A Sintex loft tank up to 500 litres starts at ₹699, a standard 1,000 litre tank is ₹899, and 1,001–2,000 litres runs ₹1,299 to ₹1,499. If you have several plastic tanks or a society block of them, we apply a bulk discount on four or more in one visit.

“Will jet-washing crack my plastic tank?” No. We deliberately drop the pressure to a level that is safe for Sintex and plastic, enough to lift the algae film and sediment but not enough to gouge or crack the walls. The corners are finished with soft scrub pads rather than wire brushes, which would leave scratches that algae grips onto. Your tank comes out clean and structurally untouched.

“Can you do same-day Sintex cleaning in Faridabad?” Yes, single Sintex loft tanks are quick, so same-day is usually possible if you call 95603 66362 before noon. It is one of the faster jobs we do, which helps us fit it into the day’s route across the NIT sectors or Greater Faridabad. We will confirm the same-day slot when you book.

“Why does my Sintex tank keep going green?” Sunlight plus warmth is why. Sintex tanks sit in the open on Faridabad rooftops, and wherever light reaches the stored water, algae grows and forms the green film you see. A poorly sealed lid or open overflow lets in even more light and spores. Cleaning it and then properly reseating the lid to cut the light is what keeps it from turning green again quickly.

Explore more from KaamGenie

See our complete water tank cleaning services in Delhi NCR — pricing, process, tank types and full city coverage.

Beyond water tank cleaning, KaamGenie is rolling out a full lineup of home services across Delhi NCR — see our complete list of 12 home services we offer or will be launching through 2026. New to tank cleaning? Read our guide on how to pick the right water tank cleaning service in Delhi — what to look for, what to avoid, and the questions that separate trustworthy crews from quick-job operators.

Specialised cleaning services in Faridabad

Water tank cleaning guides & tips

View all water tank cleaning guides →

Nearby cities we serve